Abbree AR-730 Software Download: How to Program Your Multi-Band Radio
Introduction
If you are looking for a budget-friendly, multi-band, handheld radio that can cover 2 meter, 1.25 meter, 70 centimeter, and air band frequencies, you might want to check out the Abbree AR-730. This radio has a lot of features and functions that make it a versatile device for amateur radio enthusiasts, hobbyists, and professionals alike. However, to get the most out of your radio, you need to program it according to your needs and preferences. In this article, we will show you how to download and install the software for programming your Abbree AR-730, how to connect your radio to your computer, and how to program your radio using the software. By following these steps, you will be able to customize your radio and enjoy its full potential.
What is the Abbree AR-730?
The Abbree AR-730 is a multi-band, handheld transceiver that can operate on VHF, UHF, and air band frequencies. It has a dual display, dual standby, dual PTT, and dual receiver function that allows you to monitor two channels simultaneously. It also has a wireless copy frequency function that lets you clone another radio's settings without using a cable. It supports NOAA weather channel receive, FM radio receive, DTMF encode and decode, CTCSS/DCS encode and decode, VOX function, keypad lock, scan function, squelch level adjustment, battery save mode, and more. It has a high-capacity 2200mAh Li-ion battery that can last up to 12 hours of continuous use. It comes with a Type-C charging cable that can charge the radio faster and more conveniently. It also has a sturdy and durable design that can withstand harsh environments.
abbree ar-730 software download
Why do you need to program it?
Programming your Abbree AR-730 is necessary if you want to use it for different purposes and scenarios. For example, you might want to program different memory channels for different repeaters or frequencies that you frequently use or want to access quickly. You might also want to program different settings for different functions or modes of operation, such as tone mode, power level, bandwidth, offset direction, offset frequency, etc. Programming your radio also allows you to customize it according to your personal preferences, such as display color, backlight time, beep tone, etc. Programming your radio can enhance your communication experience and make your radio more efficient and convenient.
What software do you need?
To program your Abbree AR-730, you need a software that can communicate with your radio and edit its configuration. There are two main sources where you can get the software: the official website of Abbree Electronic Co., Ltd., or other third-party websites that offer compatible software. The official website of Abbree Electronic Co., Ltd. is [1]( where you can find various downloads for different models of radios, including the AR-730. The software for the AR-730 is called APS-AR730 Programming Software. You can download it for free from the website by clicking on the link under "ABBREE" category. Alternatively, you can also get the software from other sources that offer similar or compatible software for programming radios. One example is RT Systems Inc., which provides APS- AR730 Programming Software. You can download it for a fee from the website by clicking on the link under "ABBREE" category. Both software are compatible with Windows operating systems and have similar features and functions. However, the software from RT Systems Inc. might have some advantages, such as easier installation, better customer support, and more frequent updates. You can choose the software that suits your needs and preferences best.
How to download and install the software
Once you have decided which software to use, you need to download and install it on your computer. Here are the steps to do so:
Download from the official website
If you choose to use the software from the official website of Abbree Electronic Co., Ltd., follow these steps:
Go to [1]( and scroll down to find the "ABBREE" category.
Click on the link that says "APS-AR730 Programming Software" to download the zip file.
Save the zip file to your computer and extract it using a file compression software, such as WinZip or WinRAR.
Open the extracted folder and double-click on the file that says "APS-AR730.exe" to run the software.
Download from other sources
If you choose to use the software from RT Systems Inc., follow these steps:
Go to [2]( and scroll down to find the "ABBREE" category.
Click on the link that says "APS-AR730 Programming Software" to go to the product page.
Click on the "Add to Cart" button and proceed to checkout. You will need to create an account and pay for the software using a credit card or PayPal.
After completing your order, you will receive an email with a link to download the software. Click on the link and save the file to your computer.
Open the downloaded file and follow the instructions to install the software on your computer.
Install the software on your computer
After downloading the software, you need to install it on your computer. The installation process may vary depending on which software you use, but generally, you need to follow these steps:
Run the software as an administrator by right-clicking on it and selecting "Run as administrator".
Follow the instructions on the screen to complete the installation. You may need to accept some terms and conditions, choose a destination folder, and create a shortcut icon.
After the installation is finished, you can launch the software by double-clicking on its icon or by going to Start > All Programs > APS-AR730 (or RT Systems > APS-AR730).
Congratulations! You have successfully downloaded and installed the software for programming your Abbree AR-730. Now, you are ready to connect your radio to your computer and start programming it.
How to connect your radio to your computer
To program your Abbree AR-730 using the software, you need to connect your radio to your computer using a cable. There are two types of cables that you can use: a USB cable or a programming cable. Here are the steps to connect your radio using either cable:
abbree ar-730 programming software
abbree ar-730 usb driver download
abbree ar-730 firmware update
abbree ar-730 software windows 10
abbree ar-730 software manual
abbree ar-730 software free download
abbree ar-730 software mac
abbree ar-730 software linux
abbree ar-730 software installation
abbree ar-730 software troubleshooting
abbree ar-730 software review
abbree ar-730 software alternative
abbree ar-730 software compatibility
abbree ar-730 software features
abbree ar-730 software support
abbree ar-730 software license
abbree ar-730 software version
abbree ar-730 software requirements
abbree ar-730 software tutorial
abbree ar-730 software tips
abbree ar-730 software guide
abbree ar-730 software forum
abbree ar-730 software reddit
abbree ar-730 software youtube
abbree ar-730 software video
abbree ar-730 software demo
abbree ar-730 software online
abbree ar-730 software website
abbree ar-730 software link
abbree ar-730 software file
abbree ar-730 software zip
abbree ar-730 software rar
abbree ar-730 software exe
abbree ar-730 software pdf
abbree ar-730 software csv
abbree ar-730 software rtsystemsinc.com[^2^]
Use a USB cable
If you want to use a USB cable, follow these steps:
Turn off your radio and remove its battery.
Locate the USB port on the side of your radio and plug one end of a Type-C USB cable into it.
Plug the other end of the USB cable into a USB port on your computer.
Reinstall the battery on your radio and turn it on.
Use a programming cable
If you want to use a programming cable, follow these steps:
Turn off your radio and remove its battery.
Locate the programming port on the side of your radio and plug one end of a programming cable into it. The programming cable has two connectors: one is a 3.5mm audio jack and one is a 2.5mm audio jack. Make sure you plug them into the correct holes on your radio.
Plug the other end of the programming cable into a USB port on your computer. The programming cable has a USB connector that converts the audio signals into digital signals that can be recognized by your computer.
Reinstall the battery on your radio and turn it on.
Check the COM port settings
After connecting your radio to your computer using either cable, you need to check the COM port settings on your computer. The COM port is the communication port that allows your computer and your radio to exchange data. You need to make sure that the COM port number on your computer matches the COM port number on your software. Here are the steps to check the COM port settings:
Go to Start > Control Panel > Device Manager (or right-click on My Computer > Properties > Device Manager).
Expand the "Ports (COM & LPT)" category and look for the device that corresponds to your cable. It should be labeled as "USB Serial Port (COMx)" or "Prolific USB-to-Serial Comm Port (COMx)", where x is the COM port number.
Note down the COM port number and close the Device Manager.
Open the software for programming your Abbree AR-730 and go to Settings > Port (or File > Set Com Port).
Select the same COM port number that you noted down from the Device Manager and click OK.
Congratulations! You have successfully connected your radio to your computer and set up the COM port settings. Now, you are ready to program your radio using the software.
How to program your radio using the software
To program your Abbree AR-730 using the software, you need to follow three main steps: read the current configuration from the radio, edit the memory channels and other settings, and write the new configuration to the radio. Here are the steps to do so:
Read the current configuration from the radio
Before you start editing the configuration of your radio, you need to read the current configuration from the radio and load it into the software. This will allow you to see what settings are already programmed on your radio and avoid overwriting them by mistake. Here are the steps to read the current configuration from the radio:
Turn on your radio and make sure it is connected to your computer using either cable.
Open the software for programming your Abbree AR-730 and go to Program > Read from Radio (or click on the "Read Data" icon).
Wait for a few seconds until a progress bar appears and shows that the reading process is complete.
You will see a message that says "Read data completed" and a window that shows the current configuration of your radio. You can click on different tabs to view different settings, such as memory channels, frequency range, tone mode, etc.
Edit the memory channels and other settings
After reading the current configuration from the radio, you can start editing the memory channels and other settings according to your needs and preferences. You can add, delete, modify, or copy memory channels, as well as change other settings, such as power level, bandwidth, offset direction, offset frequency, etc. Here are some examples of how to edit the memory channels and other settings:
To add a new memory channel, click on an empty row in the "Memory Channel" tab and enter the desired frequency, name, tone mode, etc. in the corresponding columns.
To delete a memory channel, right-click on an existing row in the "Memory Channel" tab and select "Delete".
To modify a memory channel, click on an existing row in the "Memory Channel" tab and change the frequency, name, tone mode, etc. in the corresponding columns.
To copy a memory channel, right-click on an existing row in the "Memory Channel" tab and select "Copy". Then, right-click on an empty row and select "Paste".
To change the power level, bandwidth, offset direction, offset frequency, etc. of a memory channel, click on the drop-down menu or the arrow button in the corresponding column and select the desired option.
To change other settings, such as display color, backlight time, beep tone, etc., click on the "Other" tab and select the desired option from the drop-down menu or the check box.
You can edit as many memory channels and other settings as you want. You can also use the "Import" and "Export" functions to import or export data from or to a CSV file. You can also use the "Print" function to print out the configuration of your radio.
Write the new configuration to the radio
After editing the memory channels and other settings, you need to write the new configuration to the radio and save it. This will overwrite the previous configuration on your radio and apply the changes that you have made. Here are the steps to write the new configuration to the radio:
Make sure your radio is still connected to your computer using either cable.
Go to Program > Write to Radio (or click on the "Write Data" icon).
Wait for a few seconds until a progress bar appears and shows that the writing process is complete.
You will see a message that says "Write data completed" and a beep sound from your radio.
Turn off your radio and disconnect it from your computer.
Congratulations! You have successfully programmed your Abbree AR-730 using the software. Now, you can turn on your radio and test its functions and performance.
Conclusion
In this article, we have shown you how to download and install the software for programming your Abbree AR-730, how to connect your radio to your computer, and how to program your radio using the software. By following these steps, you will be able to customize your radio and enjoy its full potential. Programming your radio can enhance your communication experience and make your radio more efficient and convenient.
Summary of the main points
Here are the main points that we have covered in this article:
The Abbree AR-730 is a multi-band, handheld transceiver that can operate on VHF, UHF, and air band frequencies.
To program your Abbree AR-730, you need a software that can communicate with your radio and edit its configuration. You can get the software from the official website of Abbree Electronic Co., Ltd. or from other sources that offer compatible software.
To connect your radio to your computer, you need a cable that can transfer data between them. You can use a USB cable or a programming cable.
To program your radio using the software, you need to read the current configuration from the radio, edit the memory channels and other settings, and write the new configuration to the radio.
Tips and tricks for better programming
Here are some tips and tricks that can help you program your Abbree AR-730 better and easier:
Before programming your radio, make sure you have a backup of the original configuration in case you need to restore it later. You can use the "Save" function in the software to save the configuration to a file on your computer.
Before writing the new configuration to the radio, make sure you have enough battery power on your radio and your computer. You don't want to interrupt the writing process and risk damaging your radio or losing data.
After writing the new configuration to the radio, make sure you verify that the changes have been applied correctly. You can use the "Read" function in the software to read the configuration from the radio and compare it with the configuration on your computer.
If you encounter any problems or errors while programming your radio, you can check the user manual or the online help for troubleshooting tips. You can also contact the customer service or technical support of Abbree Electronic Co., Ltd. or RT Systems Inc. for assistance.
FAQs
Here are some frequently asked questions and answers about programming your Abbree AR-730:
Q: Can I program my Abbree AR-730 without using a computer or a software?
A: Yes, you can program your Abbree AR-730 manually using the keypad and the menu on the radio. However, this method is more time-consuming and less convenient than using a computer or a software. You can refer to the user manual for instructions on how to program your radio manually.
Q: Can I use other software or cables to program my Abbree AR-730?
A: It is recommended that you use the software and cables that are compatible with your Abbree AR-730. Using other software or cables may cause compatibility issues or errors that may affect the performance or functionality of your radio.
Q: Can I program my Abbree AR-730 with other radios?
A: Yes, you can program your Abbree AR-730 with other radios that have similar or compatible features and functions. You can use the wireless copy frequency function or the programming cable to clone another radio's settings to your Abbree AR-730. However, you should be careful not to copy settings that are not supported by your Abbree AR-730, such as frequency range, mode, etc.
Q: How many memory channels can I program on my Abbree AR-730?
A: You can program up to 999 memory channels on your Abbree AR-730. Each memory channel can store a frequency, a name, a tone mode, and other settings.
Q: How can I reset my Abbree AR-730 to its factory settings?
A: You can reset your Abbree AR-730 to its factory settings by doing the following steps:
Turn off your radio and remove its battery.
Press and hold the PTT button and the MONI button on the side of your radio.
Reinstall the battery and turn on your radio while still holding the buttons.
Wait for a few seconds until you hear a beep sound from your radio.
Release the buttons and wait for another beep sound from your radio.
Your radio is now reset to its factory settings.
44f88ac181